PCP-USB Stethoscope

Note: For more information regarding the RNK-PCP USB Stethoscope, see the manufacturer's web site: https://rnkproducts.com/telemedicine-stethoscopes/

PCP-USB Stethoscope Kit Components

PCP-USB stethoscope has been verified to function with all Windows based Teladoc Health Devices.

  • Stethoscope chest piece

PCP-USB Stethoscope Operation

The Stethoscope chest piece is applied to a patient by hospital staff following the physician’s directions (received through normal Patient Access Device audio).

  • Ensure the Patient Access Device is within 6 feet of the patient.
  • Connect the PCP-USB stethoscope into the USB port of the Patient Access Device.
  • Put on gloves.
  • Apply the stethoscope chest piece on the patient as directed by the remote physician.
  • Disinfect the chest piece after the consult.
  • Remove gloves.

Cleaning, Preventive Inspection, Maintenance and Calibration

The PCP-USB requires no preventive inspection, no preventive or routine maintenance, and it does not have to be calibrated.

The PCP-USB is not a sterile device and does not require sterilization or disinfection. It can be cleaned, as required, by wiping with alcohol or a sanitizing towelette.

Troubleshooting

If no stethoscope sounds are heard from the Provider Access side, please contact Teladoc Health 24/7 Live Phone Support at +1 (877) 484-9119.